niedziela, 1 kwietnia 2012

Bear Charm

Zmazałam instrukcję jak zrobić zawieszkę misia ! Możecie to zrobić z modeliny i nawet nie musicie mieć tej metalowej foremki , sami możecie wyciąć misia :) Niedługo może coś takiego zrobię . Instrukcja jest po angielsku ale możecie po obrazkach zobaczyć jak to się robi .

Bear Charm

poly clay from cookies cutterPrepare and gather the materials & tools as per above list.
I used brown color polymer clay bought from a Japanese dollar store (Daiso).

polymer clay before kneadingPrepare your polymer clay. The polymer clay is hard and dry initially when you take out from the packaging.
When trying to bend or fold the polymer clay, it will become chappy and falling into smaller pieces.

kneading polymer clayHold the polymer clay in your hand to warm it up a moment to soften it.
Then, used your fingers to knead it.
You will find that it is difficult to knead initially as the polymer clay keeps on cracking and falling apart. Later when it gets soften, it will be easier.

[Tip: You can also use AMACO Pasta Machineor its equivalent to knead polymer clay, please don't use it to make pasta after using it for polymer clay. Read manufacturer instruction if it is your first time using this machine.]

soft smooth polymer clay after kneadingA softened and kneaded polymer clay. Not quite ready yet as you can still see some chappy holes on the right. Continue to knead a little longer.
polymer clay ballRoll the polymer clay into a ball, round and smooth.
how to  polymer clayUse a hard-cover book or something similar to press the clay ball evenly. Flatten it to about 3/8″ thick.
Or, you can use the pasta machine if they can produce this thickness.

polymer clay with cookies cutterPosition cookies cutter on the polymer clay, press to cut it out.

teddy bear shapeIf your polymer clay is big enough, you can do 2 bears together. Otherwise, repeat the kneading, rolling and pressing on the balance polymer clay.

easy polymer clayUse a hollow rod to punch a hole for the keychain ring.
I used the flat end of a used ball pen ink cartridge.

make rhinestone polymer clay craftPosition the rhinestones on the bear with tweezers. I used 15 rhinestones, you can decide how many to use depending on your bear size and rhinestone size.

push rhinestone into polymer clayUse the rod to press the rhinestones down so that they sink into the polymer clay.
make rhinstone teddy bear charmAfter all the rhinestones are pressed, set it aside and wait for baking.
Preheat your oven to 210 F or follow the instruction come with the polymer clay.

oven curred polyment clayPlace all your polymer clay crafts onto a metal sheet or baking tray.
Cure for 30 minutes or as per instruction on the packing.

teddy bear keychainAfter it is baked and cured, take out from oven and let it cool to room temperature.
Install keychain ring or other jewelry accessories.
~ Done ~

Easy Rhinestone Teddy Bear Charm

13 komentarzy:

  1. świetny jest :) i fajny motyw misia, widzialam na allegro pelno takiego typu foremek :D

    OdpowiedzUsuń
  2. świente :) bardzo mi się podoba :) Szkoda że nie mam talentu do takich różnych rzeczy...

    OdpowiedzUsuń
  3. Heh, wygląda jak piernik :)

    OdpowiedzUsuń
  4. Fajne ;]
    Można wycinać różne kształty, i różnie ozdabiać ;d

    OdpowiedzUsuń
  5. jaaaaaaaaaaakie fajne to! ♥

    OdpowiedzUsuń
  6. ale pomysłowe, całkiem jak pierniczek!
    dodaję Twojego bloga do obserwowanych, mogę liczyć na rewanż?
    http://dandystags.blogspot.com/ C:

    OdpowiedzUsuń
  7. świetny pomysł ;)

    pozdrawiam ;p

    OdpowiedzUsuń
  8. super! spróbuję zrobić
    zapraszam do mnie http://minkaaa.blogspot.com/

    OdpowiedzUsuń